Instruction manual

Using Features
Barge-In
If a co-worker is on the phone or using Do Not Disturb, use
Barge-In to reach him or her in an emergency or if you have
special instructions to interrupt. When your co-worker’s
extension is busy, Barge-in connects you to the call; if your
co-worker is using Do Not Disturb
j
the phone rings.
Barge-In is not activated on
■ a conference call if the conference already has the
maximum number of participants
■ phones that have forwarded calls by using Coverage,
Forward, or Follow Me (You hear ringing.)
■ phones that have Privacy in use (You hear a fast busy
signal.)
■ phones that are being programmed by co-workers (You
hear ringing.)
To Use Barge-In
1. Place call to co-worker.
2. Press Feature.
3. Select Barge In [Barge].
Note: If your console has a programmed Barge-In button,
place the call and then press the button to activate the
feature. Barge-In must be programmed onto a line button by
your system manager.
4-14 Barge-In