Instruction manual

Using Features
To Program Auto Dial Buttons
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Label button to be programmed with person’s name or other
identifier.
Press Menu.
Select Ext Program[Prog].
If this feature is not displayed, press More.
Select Start.
Press button you labeled.
Select ListFeature[List].
Select Auto Dial[AutoD].
If this feature is not displayed, use FindFeature[Find] or press More.
Select Inside[In] or Outside[Out].
Select Enter.
Dial extension or phone number (including dial-out code, long-
distance carrier code, area code, and any special characters).
See Notes.
11. Select Enter.
12. Repeat steps 5-11 to program additional numbers.
13. Press Home.
Notes:
■ Account codes, access codes, and outside phone
numbers can be programmed as outside Auto Dial buttons.
■ Special characters may be needed when programming an
outside Auto Dial button. For more on special characters,
see Appendix A.
Auto Dial 4-13