Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Control Unit Configuration
Page 2-30Numbering the System
2
Figure 2-4. Extension Numbers for Set Up Space Numbering Plan
Planning Form Instructions
Use Figures 2-2
through 2-4 as you record extension number information:
1. Identify the 2-digit, 3-digit, or Set Up Space numbering system you will be
using under the Factory Set column on Form 2b by circling the name of the
appropriate numbering system.
2. Do
one of the following:
■ If you do not need to renumber any of the factory-set extension
numbers:
a. Check the 2-Digit, the 3-Digit, or the Set Up Space box under
the Renumber System heading on Form 2a to indicate the
numbering plan youre using.
b. Skip to the next section, ‘‘
Updating Planning Information’’.
■ If you want to renumber only a few of the extensions and there are
enough numbers available for 2- and 3-digit numbering plans:
a. Check the 2-Digit, the 3-Digit, or the Set Up Space box to
indicate the numbering plan youre using.
Be sure to check
Selected Extension Numbers under the Renumber System
heading on Form 2a
, page 1 .
b. Write the new extension number(s) in the Renumber to
columns on Form 2a and Form 2b.
2
0
1
3
4
5
6
7
8
9
Operator Console
0***
ARS Access (Hybrid / PBX Mode ) / Idle Line Access
9***
100 — 199
200 — 299
300 — 399
400 — 499
500 — 599
600 — 699
Main Pool
70
Stations
7100 — 7299
MFMs / TAs
7300 — 7499
Page
793 — 799
Calling Group
770 — 791, 7920 — 7929
800*
Pools
890 — 899
889**
Park
881 — 888
Trunks
801 — 880
* Listed Directory Number (QCC Queue)
** Remote Access
*** System default. Can not be changed.