Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Contents
Page v
Automatic Maintenance Busy 2-9
Set System Date 2-10
Backup 2-10
System Consoles 2-10
Second Dial Tone Timer 2-11
Applications 2-11
■ Numbering the System 2-12
Identifying Extension Jacks 2-13
System Renumbering 2-28
Updating Planning Information 2-31
3 Lines/Trunks 3-1
■ Identifying Line/Trunk Jacks 3-2
Module Types and Line/Trunk Jack Types 3-2
Incoming Line/Trunk Type 3-6
Jacks for Auxiliary Equipment 3-8
Function Information 3-10
■ Selecting Line/Trunk Options 3-10
Loop-Start Reliable Disconnect 3-11
Outmode Signaling 3-12
Toll Type Prefix Required 3-13
Hold Disconnect Interval 3-13
QCC Operator to Receive Calls (Hybrid/PBX) 3-14
QCC Queue Priority Level 3-14
Pools (Hybrid/PBX Mode Only) 3-15
Remote Access 3-16
DS1 Connectivity (100D Module) 3-20
Tie Trunks 3-35
DID Trunks (Hybrid/PBX Mode Only) 3-37
NI-1 BRI Connectivity 3-39
Compensating for Slow Dial Tone (International) 3-44
■ Assigning Lines/Trunks 3-45
■ Assigning Telephone Buttons 3-47
Telephones in Hybrid/PBX Mode 3-47
Telephones in Key and Behind Switch Mode 3-52
Direct-Line Consoles 3-57