Instruction manual

MERLIN LEGEND Communications System Release 5.0

System Planning

555-650-112

Issue 1

June 1997

Before You Begin

Page 1-7Requirements for Supporting CTI Applications

Figure 1-1. System Configuration for Support of CTI applications

For this configuration you must have the equipment and software below:

■ An Intel i386, Intel i486, or Pentium Class computer with at least 16

megabytes of RAM. Additional memory may be needed if additional

applications will be running on the server machine. Refer to the MERLIN

LEGEND Network Manager’s Guide form more information.

■ NetWare Version 3.12, 4.1 or 4.11.

■ 5 megabytes of disk space available on the SYS (system) volume

■ Telephony Services for NetWare software, Release 2.2.1 or later, installed

■ An Eicon/G. Diehl SCOM card for the CTI link

■ A free 8- or 16-bit ISA slot for the Eicon/G. Diehl SCOM card

■ System software Release 5.0 or later installed on the MERLIN LEGEND

Communications System

■ The MERLIN LEGEND Communications System configured in Hybrid/PBX

mode

■ An MLX port board (using firmware version 28 or later,

except

Version 29)

installed in the MERLIN LEGEND Communications System

CTI Link

Telephony Server

Client Desktop

LAN

Public

Network

ncoming/Outgoing

Calls

MERLIN LEGEND

Release 5.0