Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Index
Page IN-8
permanent, 2-8
setting up, 2-8
L
Labeling
display telephones
, 4-49
extensions, 2-27
Posted Messages, 4-49
System Speed Dial, 4-50
Language selection, 2-9
Line coding
Primary Rate Interface (PRI)
, 3-27
T1 service, 3-22
Line compensation
settings
, 3-23, 3-28
T1, 3-23
Line options planning
BRI Line Options
, 3-39
Service Profile Identifier (SPID), 3-40
clock synchronization, 3-42
timers, 3-43
Lines/trunks
adding to the system
, 6-4
assigning, 3-45
AUDIX Voice Power, 3-10
capacity, 2-2
connecting components with, 2-4
Direct Inward Dial (DID), 3-37
DS1 connectivity, 3-20
hold disconnect interval, 3-13
identifying jacks, 3-1
incoming types, 3-6
jacks, 3-2
labels, 3-7
loop-start disconnect, 3-11
modules and jack types, 3-2
NI-1 BRI connectivity, 3-39
options, 3-10
outmode signaling, 3-12
planning overview, 3-1
pools, 3-15
Primary Rate Interface (PRI), 3-20
QCC operator to receive calls, 3-14
QCC queue priority, 3-14
remote access, 3-16
required, 6-2
T1 service, 3-20, 3-21
T1 Switched 56 service, 3-24
tie, 3-35
toll type, 3-13
Local Area Networks (LANs)
host computer data stations
, 5-16, 5-25
workstation data stations, 5-16, 5-25
Logical IDs, 2-4
Loop-Start
disconnect signal
, 3-11