Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
NI-1 BRI Review
Page G-2
G
1. On page 1, fill in the customer name, telephone number, and address.
NOTE:
Reference Number is filled in by NTM.
2. Fill in the Order Number.
3. Identify the personnel handling the account:
a. Account Executive’s name and telephone number.
b. System Consultant’s name and telephone number.
4. Identify the NI-1 BRI facility vendor by writing the vendor’s name under the
NI-1 BRI Vendor heading, along with the contact person’s name and tele-
phone number.
5. Under the Installation heading:
a. Write the “Due Date” on which the installation is scheduled to be com-
plete.
b. Write the date the equipment is scheduled for delivery to the customer
in the Materials-on-Job Date space.
6. Under the Installation Contacts heading, list the names and telephone num-
bers of the personnel responsible for the equipment order and its installa-
tion:
a. (Order) Implementor
b. NTM Manager
c. National Technical Service Center (NTSC) Engineer
d. Data Services Organization (DSO) Manager
7. Under the question about whether the order has been placed:
■
If the order has been placed, check the Yes box and fill in the expected
service turn on date.
■
If the order has not been placed, check the No box.
8. On page 2, enter the type of BRI service to be ordered. Since MERLIN LEG-
END Release 4.0 supports only National ISDN-1 BRI (2B+D) service, enter
NI-1 BRI in the space provided under the Type of Service heading.
9. Contact the local service provider and determine what type of CO switch
serves your area (such as, AT&T 5ESS, Northern Telecom DMS-100, or Si-
emens SSC EWSD). Enter this information under the Type of CO Switch
heading on page 2 of the form.