Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Modifications
Page 6-2Adding to the System
6
3. Before revising the forms, analyze and document the changes planned.
For example:
■ If adding extensions to the system, revise the floor plan to show the
location of the new telephones and the kind of equipment to be
used.
■ If activating a feature such as System Speed Dial, survey
employees to identify the numbers that should be programmed into
the speed dial file.
4. Review security information in Appendix A, ‘‘
Customer Support
Information’’ for details on how to minimize the risk of toll fraud.
Adding to the System 6
Adding to the system is defined as increasing its capacity or capability. This
increase may mean adding more or different kinds of lines/trunks, connecting
auxiliary equipment, or installing more telephones, consoles, or T/R equipment.
Forms Needed
■ Form 1, System Planning
■ Form 2a, System Numbering: Extension Jacks
■ Form 2c, System Numbering: Line/Trunk Jacks
Planning Form Instructions
1. Determine the specific type of line/trunk, auxiliary equipment, or
telephones to be added. Use Table 6-1
to determine the type of line/trunk
and/or extension module needed to support what you plan to add.