Instruction manual

MERLIN LEGEND Communications System Release 5.0
System Planning
555-650-112
Issue 1
June 1997
Features
Page 4-13Telephone and Extension Features
4
Forms Needed
■ Form 4b, Analog Multiline Telephone
■ Form 4d, MLX Telephone
■ Form 4e, MFM Adjunct: MLX Telephone
■ Form 4f, Tip/Ring Equipment
■ Form 5a, Direct-Line Console (DLC): Analog
■ Form 5b, Direct-Line Console (DLC): Digital
■ Form 5c, MFM Adjunct: DLC
■ Form 7c, Group Coverage
Planning Form Instructions
1. After assigning Individual Coverage for each receiver telephone, locate the
appropriate form for each sender telephone (Form 4b, 4d, 4f, 5a, or 5b)
2. Under the Primary Cover Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 2 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1 to 6) in the space provided.
3. Under the Secondary Cover Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 2 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1 to 6) in the space provided.
4. After assigning senders to Group Coverage on form 7c, locate the
appropriate form for each sender telephone (Form 4b, 4d, 4f, 5a, or 5b).
5. Under the Group Coverage Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 3 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1 to 9) in the space provided.