Instruction manual

Lines
Figure 3-6 Analog Multiline DLC
The system assigns lines to buttons on DLCs in the order in which the lines are
connected to the control unit. You can change the factory-set assignments by
removing, adding, or changing the order in which lines are assigned to buttons
for each DLC operator.
If the system has more than the number of lines factory assigned to operator
consoles, be sure to change the line assignment so that all lines you want
answered by a DLC operator appear on at least one operator position.
Decide which lines should appear on each DLC operator console based on
each operator’s call-handling responsibilities. All operators may not need the
same assignments. For example, DLC operators responsible for answering all
incoming calls usually need all lines except, perhaps, personal lines. DLC
operators who are responsible for answering calls for specific groups usually
need only the lines used by group members.
If the system includes a loudspeaker paging system, consider assigning a
Loudspeaker Page button to DLC positions for one-touch access to the paging
equipment.
If the system has fewer than 30 lines, the operator-only features Alarm, Night
Service and Send/Remove Message are factory assigned as shown in
Figure 3-6. The factory assignments can be changed through centralized
telephone programming or by a DLC operator.
Line Assignment 3-43