Instruction manual

Lines
Line Assignment
Follow the instructions in the Data Guide
Use these instructions to assign lines to telephones and direct-line
to assign lines to data stations.
consoles.
There are five different forms for recording line assignments. Prepare one copy
of the appropriate form for each station.
■
■
■
■
■
Key System Form 4a, Analog Multiline Telephone
Key System Form 4b, Digital/lSDN (MLX) Telephone the (front for the
telephone and the back for an adjunct connected using a Multi-Function
Module)
Key System Form 4c, Tip/Ring Equipment
Key System Form 5a, Direct-Line Console (DLC)—Analog
Key System Form 5b, Direct-Line Console (DLC)—Digital/lSDN (the front for
the telephone and the back for an adjunct connected-using a Multi-Function
Module)
Planning Form Instructions
On the front of Form 4a through 5b:
1.
Transfer the user identification from Key System Form 2a, System
Numbering — Station Jacks to each copy of all telephone forms.
■
Write the logical ID in the "Logical ID" space.
■
Write the extension number in the "Extension No." space.
■
Write the name of the person or location of the equipment in the
"Person or Location" space.
On the Reverse side of Form 4a and Form 5b:
2.
Fill in the user identification from the Key System Form 2b, System
Numbering — Digital/ISDN Station Adjuncts for any adjuncts
connected to an MLX telephone using an MFM.
■
Write the extension number in the "Extension No." space.
■
Write the name of the person or the location of the equipment in the
"Person or Location" space.
3.
Locate any "voice/voice" or "voice/data" entries in the "Person or Location"
column of Form 2a. Under the "Station Jack Pair" heading on Form 4a
and 5a:
■
Check the "Voice Announce to Busy" box or the "Simultaneous Voice
and Data" box to indicate the type of station jack pairs.
■
Enter the logical ID and extension number under the "Even-numbered
jack" heading.
3-36 Line Assignment