Instruction manual

Lines
Planning Form Instructions—Continued
For all channels you plan to associate with the group:
3.
Transfer the information from the Key System Form 2c, System Numbering
— Line Jacks to Form 3c. Write the logical ID and number in the
applicable column.
T1/ISDN-PRI Planner
To ensure compatibility with your system, all local offerings of DS1 configura-
tions must be reviewed by AT&T National Technical Marketing (NTM) personnel.
This review begins when NTM receives the “General Business Systems T1/ISDN-
PRI Planner" (pages 5 through 7 of Key System Form 3c).
Planning Form Instructions
On page 5 of Form 3c:
1.
Fill in the customer name, telephone number, and address.
Note: "Reference Number" is used by NTM.
2.
Fill in the AT&T DOSS Order Number.
3.
Identify the AT&T personnel handeling the account. Account Executives
name and telephone number and the System Consultant's name and
telephone number.
4.
Identify the DS1 facility provider by writing the provider's name in the
"T1/ISDN-PRI Vendor" space along with the contact person's name and
telephone number.
5.
Under the "Installation" heading:
■
Write the date the installation is due to be complete.
■
Write the date the equipment is scheduled for delivery to your
company next to "Materials-on-Job Date".
Under the "AT&T Installation Contacts" heading:
6.
List the names and telephone numbers of the AT&T personnel
responsible for the equipment order and the installation; the Order
Implementor, the National Technical Marketing (NTM) Manager, the
National Technical Service Center (NTSC) Engineer, and the Data
Services Orginization (DSO) Manager.
7.
Under the question about whetehr the order has been placed with the
DS1 Facility Vendor:
■
Check "Yes" if the order has been made and fill 9n the date.
■
Check "No" if the order has not been placed.
3-26 Line options