Instruction manual
Index
Group Paging, 4-9
Group assigned features, 4-8 – 4-20
Group Assignment for Night Service, 4-28
Group Calling, 4-14
configuration of Extension Status, 4-26
Group Cover button, 4-12
Group Coverage, 4-11
Group Paging, 4-9
Group Type for calling group, 4-18
GS/LS. See ground-start/loop-start
H
Hold
DLC Automatic, 4-5
One-Touch, 4-21
Timer for DLC,, 4-5
Hold Disconnect interval, 3-8
Hotel configuration of Extension Status, 4-25
Hunt Type for calling group, 4-16
Hybrid/PBX Mode, 2-9
I
ICOM. See intercom buttons
Idle Line Preference Code, 3-44
Immediate-start tie trunk, 3-35
In-band signaling, 3-20
Individual Coverage, 4-10
Inmode for tie trunk, 3-38
Inside dial tone, 4-27
Integrated VMI setting for calling group, 4-19
Integrated Voice Power Automated Attendant — IS II, station
jack for, 2-17
Intercom buttons, 3-42
Interval
Automatic Callback, 4-22
Coverage Delay, 4-12
Delayed Ring, 4-12
Hold Disconnect, 3-8
Transfer Return, 4-22
ISDN (Integrated services Digital Network) See digital/ISDN
(MLX) telephones and Primary Rate Interface facility
IVP-AA. See Integrated Voice Power Automated Attendant —
Is II
J
Jacks
logical IDs for line and station, 2-6
power failure transfer, 2-3
primary operator position, 2-13
programming, 2-8
type of station, 2-12
types of line, 3-2
K
Key Mode
explanation of, 2-9
line assignment in, 3-40
L
Labeling, 4-30
Large processor module, 2-1
Line
labeling, 4-31
Line and station modules
capacities, 2-4
definition of, 1-3
placement in control unit, 2-5
Line assignment, 3-36 – 3-44
Behind Switch mode, 342
DLC, 3-42
Key mode, 3-42
telephones, 3-41
Line buttons, 3-38
Line code for DS1 facility, 3-17
Line compensation for DS1 facility, 3-18
Line connections+, 3-1
Line jacks
coding, 3-3
logical IDs, 2-6
types of, 3-1
Line options, 3-7 – 3-35
DS1 facility (100D module), 3-13
Hold Disconnect, 3-8
loop-start disconnect reliability, 3-7
Primary Rate Interface facility, 3-21
Remote Access, 3-7
rotary dial lines, 3-8
T1/lSDN-PRl Planner, 3-28
tie trunks, 3-35
Toll Type, 3-8
Linear Hunt Type for calling groups, 4-16
Local clock reference source for DS1 facility, 3-19
Local setting for tie-trunk dial tone, 3-38
Logical IDs, 2-6
relationship to extension numbers, 2-11
Login/logout for calling group, auto, 4-19
Long Hold Disconnect interval, 3-8
Loop clock reference source for DS1 facility, 3-19
Loop-start
IN-4