Instruction manual

Preparation
Several actions must be completed before the system is installed:
■ Review the system’s hardware, features, and operation.
■ Arrange for the location of the control unit.
■ Survey telephone users on their needs.
■ Find or create a floor plan.
System Components
To tailor the system for your company, you must know the number and types of
telephones, outside lines, and adjuncts that were ordered. Review the AT&T
Equipment List provided by your AT&T representative or authorized dealer.
If you did not participate in ordering, talk with your management about how the
equipment ordered will be used—for example, which employees will get what
telephones, which consoles operators will be using, and where adjuncts will be
located.
Figure 1-1 shows the components of a typical system. Your system may not
have all the components pictured, or it may have additional or different
components. The numbered items in the figure correspond to the descriptions
that follow.
System Components 1-1