User`s guide

Features
To Turn Automatic Callback On and
Off
1. Slide the T/P switch to P.
2. Press any ICOM or SA button.
3. Dial:
■ ✱ 12 to turn on
■ ✱✱ 12 to turn off.
4. Slide the T/P switch to the center position.
To Use Automatic Callback
1. When you reach a busy line or extension and hear five
short beeps, hang up.
Your call is placed in queue until the line or extension becomes
available. The green light next to the line button flashes.
2. When you hear two short rings and one long ring, Iift
the handset, press Speakerphone, or press On/Off on
a cordless phone.
You hear three short beeps, and your call is dialed automaticlly.
The green light next to the tine button is steady.
NOTE:
An outside call is not placed until you lift the handset or
press Speaker. An inside call does not ring until you lift
the handset or press Speaker.
5-18 Callback