User`s guide

Programming Special Characters
Special Characters Table
Press…
See*...
Means…
Drop†
Hold
s
P
Conference f
#
#
Stop. Inserts a stop within a sequence
of automatically dialed numbers. For
example, an outside Auto Dial button
may be programmed with a password
then a Stop, followed by a phone
number. To use Auto Dial with a Stop in
the sequence, press the button to dial
the password, listen for the dialing and
connection, and press the
to dial the phone number.
Pause. Inserts 1.5 second
dialing sequence. Multiple
pauses are allowed.
button again
pause in the
consecutive
Flash. Sends a switchhook flash. Must
be the first entry in the dialing
sequence.
End of Dialing. Used at the end of a
dialing sequence to indicate you have
finished dialing or to separate one
group of dialed digits from another.
* Display phones only.
† Not availabe on MLC-5 cordless phones.
A-2
Programming Special Characters