User`s guide

Features
Personal Speed Dial
Use Personal Speed Dial to dial 2-digit codes instead of the
entire dialing sequence for numbers you dial often on your
BIS-10 or MLC-5 cordless phone. Personal Speed Dial can be
used for account codes, long-distance access codes, and
area codes. You can program up to 24 Personal Speed Dial
codes that can be used only from your phone.
If you have a BIS-34 or a BIS-22 phone, with or without
display, you must use Auto Dial instead. On these phones,
Personal Speed Dial will program over other buttons.
To Program Personal Speed Dial Codes
1. Slide the T/P switch to P.
2. Dial # and a 2-digit code from 01 to 24 and then ✱ 21.
3. Dial the phone number or account code (including dial-
out code, and any necessary numbers such as long-
distance carrier code, area code, and/or special
characters).
4. Repeat Steps 2 and 3 to program additional codes.
5. Slide the T/P switch to the center position.
NOTE:
Special characters may be needed when programming a
Personal Speed Dial code. For more information on
special characters, see Appendix A.
5-62
Personal Speed Dial