User`s guide

Features
To Program a Coverage Off Button
1. Label the button to be programmed as Coverage Off.
2. Slide the T/P switch to P.
3. Press the button you labeled Coverage Off.
4. Dial ✱ 49.
5. Slide the T/P switch to the center position.
To Turn All Coverage Off and On
1. Press the programmed Coverage Off button.
The green light next to the button goes on. No calls to you will go to
Coverage.
2. Press the programmed Coverage Off button again.
The green light next to the button goes off. Your calls will go to
Coverage.
NOTE:
When the green light next to this button is off, all calls to
you are sent to Coverage, unless you have also activated
Coverage Inside Off or Coverage VMS, as described in
the preceding sections.
Coverage
5-31