Specifications

Environmental Requirements (continued)
Temperature Humidity Range
40°–104°F; 4–40°C (optimum temperature 60°F)
20%-80% relative humidity
Ventilation
1” on left side; 1” on right side; 12” above; 12” below
Cautions
■ Do not use switch control on AC outlet for control unit.
■ Use approved ground (AC receptacle for 3-prong plug).
■ Do not install control unit outdoors.
■ Do not place control unit near extreme heat (furnaces, heaters,
attics, or direct sunlight).
■ Do not expose control unit to devices that generate electrical
interference (such as arc welders or motors).
■ Do not place anything on top of carriers.
■ Do not install control unit under any device that may drip fluid,
such as an air conditioner.
Page 3