Instruction manual

System Guides Information Finder
Table 7–2, Continued
To Learn About These Features . . . Check This Guide . . .
Basics (continued)
Finding out about system reports offering details about
a feature as it is used on your system
Feature Reference. See entry for feature
and Appendix F.
System Programming , Appendix F
Changing Automatic Route Selection (ARS) Consult your AT&T representative and see
System Programming, Chapter 4.
Feature Reference. See “Automatic Route
Selection.”
Finding out about operator features, settings, and
options
Feature Reference. See entry for console
(DLC or QCC) and for Direct Station
Selector (DSS).
Display Features: Labeling
Changing the information that appears about an
extension when you add, delete, or modify extensions
in the system
System Programming, Chapter 3
Changing the information that appears about groups
when you add, delete, or modify groups in the system
System Programming, Chapter 3
Changing the information that appears about lines and
trunks when you add, delete, or modify lines/trunks in
the system
System Programming, Chapter 3
Changing Posted Messages System Programming, Chapter 3
Changing the System Directory for speed dialing
numbers that people call often
System Programming, Chapter 3
Planning and Programming Features
Feature factory settings Feature Reference. See entry for feature.
How features interact with one another Feature Reference. Under feature entry,
see “Feature Interactions.”
How features interact with applications Feature Reference , Appendix I
Feature programming codes System Programming, Appendix D
Planning features on buttons Feature Reference , Appendixes B and G
System Programming , Appendix E
Copying programmed telephone features from one
extension to another
System Programming, Chapter 5
Finding out which system planning forms to consult in
order to find out how features are programmed on
your system
Feature Reference , Appendix B
Continued on next page
Learning More
7–15