Instruction manual

Assigning Disallowed Lists to Extensions
Valid Entries
11 digits for each number (+ wildcard Pause character, entered by pressing the
Hold button)
Asterisk (*) or star or
11 (Release 3.1 and later systems only) a maximum of one
leading star code in each entry
10 numbers for each list (numbered 0 through 9)
8 lists for each system (numbered 0 through 7)
8 lists for each telephone
Task List: Changing Disallowed Lists
o Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o If necessary, read “Allowed/Disallowed Lists”
in the Feature Reference for
detailed information about this feature.
o Plan changes using the planning guidelines above; record the new
values on the form(s).
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions for “Disallowed Lists” in
the “
System Features
”
section of System Programming , Chapter 3, or the
summary programming instructions below.
o When you have finished, file the form(s) with the rest of the planning
forms.
Programming Instructions
Console Procedure:
→ →Dial list no. and entry no.→
→Drop→ Dial no.→ →
PC Procedure:
8
→3→Type list no. and entry no.→0→A
+ P
→Type no.→0→5
Assigning Disallowed Lists to
Extensions
Use this procedure to assign established Disallowed Lists to individual
extensions.
6–66 Managing the System