Instruction manual

Assigning Allowed Lists to Extensions
o Program the change(s), following the instructions for “
Allowed Lists
” in
the “
System Features
” section of System Programming , Chapter 3, or the
summary programming instructions below.
o When you have finished, file the forms with the rest of the planning forms.
Programming Instructions
Console Procedure:
→ →Dial list no. and entry
no.
→ →Drop→Dial no.→ →
PC Procedure:
8
→1→Type list no. and entry no.→0→
A + P→Type no.→0→5
Assigning Allowed Lists to Extensions
Use this procedure to assign individual extensions to established Allowed Lists.
Planning Guidelines
More than one Allowed List can be assigned to an extension.
NOTE:
You can copy calling restrictions. See “
Copy Call Restrictions
”
in Chapter 3 of
System Programming .
Valid Entries
0 to 7
Task List: Assigning Allowed Lists to
Telephones
o Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
o If necessary, read “Allowed/Disallowed Lists”
in the Feature Reference for
detailed information about this feature.
o Plan changes using the planning guidelines above; record the new
values on the form(s).
o Open the System Programming menu from the console or a PC with SPM.
o Program the change(s), following the instructions for “
Assign Allowed
Lists to Telephones” in the “System Features” section of System
Programming
, Chapter 3, or the summary programming instructions
below.
Managing the System
6–63