Instruction manual

Setting System Date and/or Time
To print system programming reports, use one of the following procedures:
Console Procedure: To print trunk information:
More
→ → →Select trunk type→
To print extension information:
More
→ →More→ →Dial extension
number
→ →
To print all other reports:
More
→ →Select report→
PC Procedure To print trunk information:
u
→3→6→Select trunk type→5
To print extension information:
u
→3→u→0→Type extension number→
0→5
To print all other reports:
u
→3→Select report→5
To save report on disk:
u
→3→Select report→0→select
from below console simulation screen→0
To view report:
C + 8
NOTE:
The Extension Information report incorrectly lists MLX-16DP telephones as MLX-
28D telephones. If you have MLX-16DP telephones in your system, keep a
separate log of the extension numbers.
Setting System Date and/or Time
Use this procedure to change the system date and/or time. These must be set
correctly. System time affects the functioning of several system features and
applications, including Automatic Backup, Night Service, SMDR reports,
standalone auto attendant systems, voice mail, and Reminder Service.
NOTE:
Be sure to change the system time appropriately when Daylight Savings Time
starts and when it ends.
Planning Guidelines
If you change the system time while the system is in Night Service mode, Night
Service is deactivated and must be manually reactivated.
6–36 Managing the System