Instruction manual

Centralized Telephone Programming
Console/Display Instructions Additional Information PC
3 Save your entry.
Select
. 0
4 Specify the number of the extension to which you want to copy programmed
features or SA or ICOM buttons.
xxxx = extension entered in Step 2
Dial or type [ nnnn ].
Û
5 Continue to copy line assignments and programmed features from the copy
extension shown to another extension or go to Step 7.
Select
to continue copying
line assignments from the
extension currently displayed on
Line 1 to additional extensions.
Select
if the extension numbers to be
copied to are sequential. Select
(0) after completing programming.
Return to Step 4 to continue programming. The
extension to be copied from will be displayed on
Line 1.
6 Return to the Centralized Programming menu.
Select
. 5
7 Save your entry.
Select
. 0
8 Return to the Centralized Programming menu.
Select
. 5
Copying Line/Trunk Button Assignments
Use this procedure to copy outside line/trunk button assignments, pool dial-out
code restrictions (Hybrid/PBX only), and Night Service information (for operator
positions only). You can copy from one extension to another or to a block of
extensions with identical requirements. Use system programming for this
procedure.
Managing the System
6–31