Instruction manual

Centralized Telephone Programming
Console/Display Instructions Additional Information
5 Type the remote access password to display the SPM Main Menu shown in
Step 6.
The password does not display when you type it.
6 To reach the System Programming menu, select System Programming by
pressing 11.
1 6
2 7
3 8
4 9
5 0
NOTE:
The function keys shown on either side of the display are included here for quick
reference. On the PC screen these do not look like actual keys.
7 Perform the procedures contained in the task descriptions later in this chapter.
Centralized Telephone Programming
Centralized telephone programming allows you, as the system manager, to
program the following:
■
Any feature that can be programmed by individual telephone users or by
operators. Certain features can be copied from one extension to another
in the system.
■
Certain features that can be programmed only by using centralized
programming:
—
Barge-In
—
Headset Hang Up
—
Intercom buttons: all types (Key and Behind Switch mode only)
—
System Access buttons: all types (Hybrid/PBX only)
6–22 Managing the System