Instruction manual

Programming from the Console
Console/Display Instructions Additional Information
1 Display the Menu Mode (main menu) screen.
Press the Menu
button.
2 Select System Programming.
If the programming console is a QCC,
does not appear on this screen.
_
3 Display the System Programming menu.
On the System Set-up screen,
system information appears in place of
the s.
= Large
= Key, Hybrid/PBX, or Behind Switch
= Position extension numbers
_
Select .
4 Make a selection.
Press the button or function key next to
your selection.
Exiting System Programming
Use the information in Table 6–5 to return to the System Programming menu, the
main menu (Menu Mode screen), or the Home screen.
Managing the System
6–17