Instruction manual

Introduction to System Programming
■
Data Entry Screens. To enter values or to identify a specific extension or
line/trunk you want to program.
This section describes each screen type and the System Programming menu; it
also provides information about saving entries and moving among screens.
Information Screens
Information screens display what is currently programmed on your system. You
cannot make changes on an information screen. Figure 6–
1 shows a sample
information screen. When you select from the main menu screen, the
screen shown in Figure 6–1 appears with system setup information.
Your system information appears in
place of .
Figure 6–
1. Information Screen
Menu Selection Screens
A menu selection screen prompts you to select a listed option. The screen title
is the first line on all screens. The second line contains a system prompt or
instruction. The remaining lines of text vary based on options. Figure 6–2 shows
a sample menu selection screen.
An angle bracket (
) appears in the upper right corner of menu selection
screens that have additional option screens. Press More (or u on the PC) to
see the additional screens. Continue to press More to move through the
screens and eventually return to the original screen.
Screen title and More indicator ( )
Prompt
Options
Figure 6–
2. Menu Selection Screen
6–6 Managing the System