Instruction manual

Using the Programming Procedures

This section provides an overview of how to read the procedures and summary

procedures in this chapter. For more detailed information, see Chapter 1,

“Programming Basics,” in

System Programming

All programming procedures begin from the System Programming menu. For

information about how to access this menu from the console or from a PC with

System Programming and Maintenance (SPM), or how to use centralized

telephone programming, see the appropriate sections that follow this chapter.

Using Detailed Procedures

The detailed procedures consist of numbered steps in the format shown in the

following Steps 4 and 5 extracted from an actual procedure.

Console/Display Instructions Additional Information PC

4 Select Start.

xxxx

= extension entered in Step 2

5 Select the line button to which you want to assign the feature.

xxxx

= extension entered in Step 2

Press the line button or function key that

corresponds to your selection.

The format includes numbered steps that appear in a gray bar. It contains three

columns, each with a header:

■

Console/Display Instructions. In most cases, the screen shown in this

column contains the results of the previous step. The console key that

corresponds to the option you are to select is highlighted in black (see

in the sample Step 4). The function key that corresponds to the

highlighted console option appears in the right column under the PC

header.

Managing the System

6–