Instruction manual

Adjuncts
Table 3–
5. Adjunct Summary
Equipment Type Line/Extension/Adapter Type
Alerts (AC):
Any audible or visual alert that operates on 20–30 Hz
ringing signals; associated with a specific extension
(supplemental alert).
Can be connected to:
008 OPT, 016 (Release 4.0 and later), or
012 T/R extension jack
MFM and MLX extension jack
GPA and analog extension jack
Alerts (DC):
Audible or visual alert operating on 48-VDC ringing
signals; associated with specific extension (supple-
mental alert) or works on programmed trunk jack
(external alert).
Can be connected to:
LS trunk jack
Requires UPAM to provide 48 VDC.
MFM and MLX extension jack
SAA and analog extension jack
Answer/Record Machine:
Industry-standard machine; low ringer equivalence
(< 0.15 or < 1.0 total REN for T/R port). It has ability to
recognize 600-ms disconnect signal or other means
of automatic disconnect (such as voice reset
disconnect timer, fixed recording time).
Can be connected to:
008 OPT, 016 (Release 4.0 and later), or
012 T/R extension jack
MFM and MLX extension jack
GPA and analog extension jack
Cannot be connected to a QCC.
Credit Card Verification Terminal:
Must have touch-tone dialing capability when
connected by MFM; rotary or touch-tone dialing can
be used on T/R port.
Can be connected to:
008 OPT, 016 (Release 4.0 and later), or
012 T/R extension jack
MFM and MLX extension jack
With MFM, device originates and
receives calls independently of phone.
GPA and analog extension jack
Cannot be connected to a QCC.
Dial Dictation:
A device that requires contact closure can be used
on LS/GS line jack only with UPAM.
Can be connected to:
LS or GS/LS trunk jack
008 OPT, 016 (Release 4.0 and later), or
012 T/R extension jack
MFM and MLX extension jack
GPA and analog extension jack
Cannot be connected to a QCC.
Requires UPAM to provide 48 VDC.
Direct Station Selector (DSS):
A maximum of 2 DSSs per operator console; 329A
power supply required for console with 2 DSSs.
Connects to DSS jack on MLX operator
console only
Door Phone:
Use system programming to designate phone to ring.
Connects to loop-start line/trunk jack.
ExpressRoute 1000 ISDN Terminal Adapter:
Acts as DCE for high-speed data communications.
Can be connected to MLX extension jack
Cannot be connected to a QCC.
Continued on next page
System Components
3–41