User`s guide

To restore the default code:
1
2
3
4
5
6
On the back of the MERLIN II Attendant, set switches 1 and 2 to off (up).
Unplug the MERLIN 11 Attendant from ac power.
Wait 30 seconds.
With switches 1 and 2 still
off (up), plug the MERLIN II Attendant back
into its power source.
Reset switches 1 and 2 to
on (down).
Use the appropriate MERLIN II Attendant Planning Forms to reprogram
your settings and rerecord your announcements.
3-2 Troubleshooting