User`s guide

To schedule for a holiday or business closing on a day that your business is
usually open, use this command to enter the day as “closed” up to six days
before the closing.
If you choose the holiday closing, the MERLIN 11 Attendant
automatically resumes your normal schedule at midnight without additional
programming.
1 Dial the MERLIN 11 Attendant extension number from a Touch-Tone
phone, preferably a single-line set.
NOTE:
If you are programming from a multiline Touch-Tone phone
connected to a MERLIN II system control unit, you must enter an
additional pound ( # ) sign each time a pound ( # ) sign appears in
a programming command.
2 Wait for an answer.
3
4
5
6
7
8
Dial * followed immediately by your authorized caller code and #.
The two-beep confirmaion tone sounds.
Dial *74 followed by a code for the day of the week.
1
= Sunday
2
= Monday
3
= Tuesday
4
= Wednesday
5
= Thursday
6
= Friday
7 = Saturday
9
= entire week
Dial one digit to indicate whether the business is open or closed for the
day entered or if it is closed for a holiday.
1
= Open
2
= Closed
3=
Holiday
The two-beep confirmation tone sounds.
Repeat steps 4 and 5 of this procedure for each
needed.
day of the week, as
Continue programming or exit authorized caller mode by dialing * #.
To disconnect, dial #.
CHANGING THE CLOCK
To adjust the MERLIN II Attendant’s clock by one hour (for Daylight-Savings
FOR DAYLIGHT SAVING
Time), use the following instructions.
TIME
1 Dial the MERLIN II Attendant extension number from a Touch-Tone
phone, preferably a single-line set.
NOTE: If you are progr
amming from a multiline Touch-Tone phone
connected to a MERLIN II system control unit, you must enter an
additional pound ( # ) sign each time a pound ( # ) sign appears in
a programming command.
2 Wait for an answer.
3 Dial * followed immediately by your authorized caller code and #.
The two-beep connation tone sounds.
Changing the Current Settings 2-5