Programming instructions

MERLIN LEGEND Planning
MERLIN LEGEND Form 6f:
System Features
Use MERLIN LEGEND Form 6f to specify information on the following system
features:
■
■
➀
➁
Transfer Return Interval—the number of rings before the transferred call
returns to the transfer originator. This value should be greater than the
Group Coverage Delay Interval (factory setting is three rings), which is
the number of rings before a call is sent to a Group Coverage receiver.
Transfer Redirect Extension—the extension to which calls to unassigned
extensions or numbers with no coverage can be transferred.
Return Time Interval
Under Transfer Options on Form 6f, verify the Transfer Return Interval
(shown as Return Time Interval). Check with the MERLIN LEGEND System
Manager to make sure that it is greater than the Group Coverage Delay
Interval. If a change is necessary, check the appropriate box and write the
new Transfer Return Interval.
Calls to Unassigned Extensions
Verify the current Transfer Redirect Extension. Calls can be transferred to
a Queued Call Console (QCC), an individual extension, or a Calling Group
extension. If a change is necessary, check the appropriate box and write
the new extension.
2-18 MERLIN LEGEND Form 6f