Instruction manual

Features

Call Waiting

At a Glance

Users Affected

Reports Affected

Mode

Telephones

Programming Code

Off

Feature Code

MLX Display Label

Factory Settings

Telephone users, DLC operators

Extension Information

All

All except QCC

*11

**11

(for Call Waiting pickup)

CallWaiting,On [CWait,On]

CallWaiting,Off [CWait,Off]

Off

Description

When a telephone is programmed with Call Waiting, a user whose telephone is

busy hears a tone when another call is received. For an inside call, the user

hears one beep; for an outside call, the user hears two beeps. MLX display

telephone users also see Call Waiting on the display. The caller hears a

special ringback to indicate that the telephone is busy and that the Call Waiting

tone has been sent.

A multiline telephone is considered busy when no SA or ICOM button is

available for incoming calls and, if Coverage is programmed, all Coverage

points are busy.

A single-line telephone is considered busy when a call is ringing on the

telephone or the user has lifted the handset and, if Coverage is programmed, all

Coverage points are busy.

Each telephone can be programmed with Call Waiting on or off. The default is

Call Waiting off.

Call Waiting