Instruction manual

Features
Automatic Route Selection
At a Glance
Users Affected
Telephone users, operators
Reports Affected
Automatic Route Selection
Extension Directory
Extension Information
Remote Access (DISA) Information
Mode
Hybrid/PBX only
Telephones
All
System Programming Specify the type of table (six-digit, area code, local exchange,
or 1 + 7) and the area codes and/or exchanges to be included
in the table:
● Tables → ARS → ARS Input
Specify that 1 + 7 tables should be searched when a leading 1
is dialed:
● Tables → ARS → ARS 1+7Dial
Specify time of day when calls are routed by using Subpattern
A or B routing information:
● Tables → ARS → Sub B Start/Stop
Identify the trunk pools (up to six) on which calls are to be
routed:
● Tables → ARS → Sub A Pools/Sub B Pool
Assign or remove the FRL associated with each route:
● Tables → ARS → Sub A FRL/Sub B FRL
Specify the number of digits that need to be absorbed by the
system when it routes calls on an identified route:
● Tables → ARS → Sub A Absorb/Sub B Absorb
Specify the digits or special characters that must be added by
the system to the number dialed by the user when calls are
routed on an identified route:
● Tables → ARS → Sub A Digit/Sub B Digit
Continued on next page
46 Automatic Route Selection