Instruction manual

Features
Table 1. Special Characters for Auto Dial
Press...
See*...
Means...
Drop†
Hold
Conference
##
s Stop. Halts dialing within a sequence
of automatically dialed numbers. For
example, an outside Auto Dial button
may be programmed with a password
then a Stop, followed by a phone
number. To use Auto Dial with a Stop in
the sequence, press the button to dial
the password, listen for the dialing and
connection, and press the button again
to dial the phone number.
p
Pause. Inserts 1.5 second pause in the
dialing sequence. Multiple consecutive
pauses are allowed.
f
Flash. Sends a switchhook flash. Must
be the first entry in the dialing
sequence.
#
End of Dialing for Extension
Programming only. Used at the end of
a dialing sequence to indicate you have
finished dialing or to separate one
group of dialed digits from another, for
example, account codes from number
dialed.
#
End of Dialing. Used at the end of a
dialing sequence to indicate you have
finished dialing or to separate one
group of dialed digits from another.
#
*
Display phones only.
†
Not available on MLC-5 cordless phones.
Auto Dial 33