Instruction manual

Features
Auto Dial
At a Glance
Users Affected
Telephone users, DLC operators
Reports Affected
Extension Information
Mode
All
Telephones
All except QCC and single-line telephones
Programming Code
Inside
*22 + ext. no.
Outside
*21 + number
MLX Display Label
Auto Dial,Inside [AutoD,In]
Auto Dial,Outside [AutoD,Out]
Maximums
28 digits, including special characters
CAUTION:
Emergency numbers and other numbers should be tested during off-
peak hours, such as early morning or late evening. The user should
remain on the line and briefly explain to the dispatcher the reason for
the call.
Description
Auto Dial buttons are used for one-touch dialing of frequently called telephone
numbers. Two types of Auto Dial buttons can be programmed:
■ Inside Auto Dial: This button is used for any extension or group
extension in the system (such as co-workers, calling groups, fax
machines, or a voice mail system), a Paging Group extension, or a
calling group extension. A system operator can also program an inside
Auto Dial button for a Park Zone extension number.
When an inside Auto Dial button is programmed, the user can see the
status of the extension associated with the button; the green LED next to
the button is on when a person at the extension is on a call, using Do Not
Disturb, or the telephone is in forced idle for centralized telephone
programming or system programming.
■ Outside Auto Dial: This button is used not only for frequently called
telephone numbers, but also for numbers such as account codes, long-
distance company access codes, bank access codes, or emergency
contact numbers.
Auto Dial 31