Instruction manual

Programming Special Characters

This appendix provides the special characters used in dialing sequences for

numbers dialed automatically, such as on Auto Dial buttons. The characters

allowed depend on the type of telephone.

Single-Line Telephones

Some dialing sequences need special characters. For example, the user would

press and release either the Recall or Flash button or the switchhook to insert a

Pause in a dialing sequence after a dial-out code to allow the system to seize an

outside line before dialing the number.

Table G-1. Special Characters for Single-Line Telephones

Press...

Means...

Recall, Flash,

Pause. Inserts 1.5-second pause in the dialing sequence. Multiple

or switchhook

consecutive pauses are allowed.

End of Dialing. Used to signal the end of the dialing sequence or to

separate one group of dialed digits from another, such as an Account

Code from a telephone number.

Single-Line Telephones G-1