Instruction manual

Features
Auto Answer All
At a Glance
Users Affected
Telephone users, DLC operators
Reports Affected Extension Information
Mode All
Telephones
Analog multiline
Programming Code
*754 (centralized telephone programming only)
MLX Display Label
AutoAnsAll
Hardware General Purpose Adapter (GPA) needed to connect answering
device to analog multiline telephone; 502B/502C headset
adapter needed for headset options
Description
With Answering Device: Auto Answer All is used on analog multiline
telephones only or analog Direct-Line Consoles (DLCs) with a modem,
answering machine, fax machine, or other answering device connected through
a GPA to answer both inside and outside calls when the user is not available.
To activate Auto Answer All, the user slides the switch on the GPA to Auto and
presses the Auto Answer All button. The green LED next to the button turns
on, and incoming calls are answered automatically.
To deactivate the feature, the user can either slide the switch on the GPA to
Basic or press the Auto Answer All button. If the button is pressed to
deactivate the feature, the green LED next to the button goes off. In either
case, the telephone returns to normal operation.
With Headset: Auto Answer All can also be used with a 5026 or 502C headset
adapter to allow the analog multiline telephone user or analog DLC operator
with a headset to be connected automatically to ringing calls. A tone heard
through the headset signals an incoming call.
A programmed button is used to activate and deactivate Auto Answer All. The
user selects the lines to be answered by the device by programming Immediate
Ring or Delay Ring as the ringing option. Lines that are not to be answered are
programmed as No Ring.
26
Auto Answer All