Instruction manual

Sample Reports
Table E-2. System Reports
Menu Option Report Name Description
All
SysSet-up
Dial Plan
Labels
Trunk Info
TIE
DID
Loop/
Ground
General
T1 Info
PRI Info
Rmote
Access
Oper Info
System Information
Dial Plan
Label Information
TIE Trunk Information
DID Trunk Information
GS/LS Trunk Information
General Trunk
Information
DS1 Information
PRI Information
Remote Access (DISA)
Information
Operator Information
Prints each of the reports available on the
Print menu, from SysSet-up to Error Log.
Note: When All is selected, the four Trunk
Information reports automatically print. See
Trunk Info.
System-wide information such as return
intervals, system mode, system
programming port, slot assignments, etc.
Extensions assigned to pools, paging
zones, calling groups, lines or trunks, and
stations; labels for lines/trunks and stations.
Labels assigned to stations Posted
Messages, and names and telephone
numbers included in MLX-20L user’s
Personal Directory.
Select to display four trunk options: TIE,
DID, Loop/Ground, General.
Extensions assigned to and signaling
attributes associated with TIE trunks.
Extensions assigned to and signaling
attributes associated with DID trunks.
Extensions assigned to and signaling
attributes associated with Ground- and
Loop-Start trunks.
All identified extensions and feature-related
attributes of each extension.
Options (line, signal, etc. ) assigned to T1
trunks or lines.
PRI trunks/lines assigned to B-channel
groups.
Remote access dial code, class of
restriction, barrier code information.
For each system operator position; the
logical ID, extension number, label, type
(DLC or QCC); all general system operator
options, such as backup position, etc.; call
types and priorities.
Continued on next page
Sample Reports E-3