Instruction manual

General Feature Use and Telephone Programming
Table C-4. Programming MLX Display Telephones Using the Display
Step
Action
1 Label the button to be
programmed.
Note: Skip this step if the
feature will not be programmed
onto a button.
2 Begin programming.
3
Identify the button to be
programmed.
To delete the feature currently
programmed on the button:
To display features:
■ Remove the clear label cover from the
telephone by pulling upon the tab that
extends from the top of the cover.
■ Write the feature name on the card next
to the button to be programmed.
■ Replace the cover.
■ Press Menu.
■ Select Ext Program from the display.
■ Select Start from the display.
■ Press the button you labeled.
Note: If the feature does not get
programmed onto a button, press any
line button. This does not affect the
button in any way.
The display identifies the feature
currently programmed on the button. If
no feature is programmed, the display
indicates that the button is blank.
■ Select Delete from the display. The
button is now blank.
■ Press the button you labeled again to
continue programming.
Note: If the currently programmed
feature was not deleted from the button,
the new feature programmed onto it will
replace it.
■ Select List Feature from the
display.
The screen lists feature names in
alphabetical order.
Telephone Programming
C-19