Instruction manual

General Feature Use and Telephone Programming
Table C-3. Programming MLX-10 Telephones
Step
Action
1 Label the button.
Note: Skip this step if the
feature will not be programmed
onto a button.
2
Begin programming.
3 Select the feature.
4
End programming.
■ Remove the clear label cover from the
telephone by pulling up on the tab that
extends from the top of the cover.
■ Write the feature name on the card next
to the button to be programmed.
■ Replace the cover.
■ Press the Feature button and dial then
00.
■ Press the button you labeled.
Note: If the feature does not get
programmed onto a button, press any
line button. This does not affect the
button in any way.
■ Dial the programming code.
The feature is programmed.
■ Press the Feature button and dial *OO.
C-18 Telephone Programming