Instruction manual

Feature and Planning Forms
Feature
Planning Form
Remote Access
2d — System Numbering—Special Renumbers
3a —
Incoming Trunks—Remote Access
Ringing/Idle Line Preference
(See Automatic Line Selection and
Ringing/Idle Line Preference)
Ringing Options
Saved Number Dial
4b
— Analog Multiline Telephone
4d — MLX Telephone
4e —
MFM Adjunct—MLX Telephone
5a
— Direct-Line Console (DLC)—Analog
5b
— Direct-Line Console (DLC)—Digital
5c —
MFM Adjunct—DLC
Button diagrams on all appropriate telephone forms
Signal/Notify
Button diagrams on all appropriate telephone forms
Speed Dial
8b — System Speed Dial
Station Message Detail Recording (SMDR)
6f — System Features
System Access/Intercom Buttons
Button diagrams on all appropriate telephone forms
System Renumbering
2a
— System Numbering—Station Jacks
2b — System Numbering—Digital Adjuncts
2c — System Numbering—Trunk Jacks
2d — System Numbering—Special Renumbers
6a
— Optional Operator Features
6c —
Group Paging
6e — Group Calling
Toll Type
2c —
System Numbering—Trunk Jacks
9a — Automatic Route Selection Worksheet
Touch-Tone or Rotary Signaling
2c — System Numbering—Trunk Jacks
3c —
Incoming Trunks—Tie
3d —
Incoming Trunks—DID
6f — System Features
Features and Planning Forms A-9