Instruction manual

Features
Microphone
Disable
Multi-Function
Module
Music-on-Hold
Paging
Park
Pickup
Recall
Ringing Options
Saved Number
Dial
Signaling
If an inside call is transferred to a telephone with a Posted
Message, only the display telephone user who transfers the call
sees the message. The original caller does not see the Posted
Message even after the transfer is completed.
If a call is transferred to an extension programmed as a fax port,
the message indication is not sent to the fax message-waiting
receiver, regardless of the amount of time programmed for the
fax message-waiting threshold.
A call can be transferred with a voice announcement to a users
whose microphone is disabled, but the user must lift the
handset to talk.
Calls cannot be transferred from an MFM because the MFM
cannot send a switchhook flash.
An outside caller hears Music-on-Hold if it is programmed for
Transfer Audible. Music is played only during the time before
the transfer is completed by the originating extension. The
caller hears music when the Transfer button is pressed and
while the destination extension is being dialed. When the
transfer originator presses the Transfer button a second time or
hangs up, the caller hears ringback.
Calls cannot be transferred to Paging Groups or the
Loudspeaker Paging extension.
A user can park calls by pressing the Transfer button and
dialing his or her own extension. A DLC operator can also
press Transfer and dial a system operator Park Zone
extension. When either of these methods are used, the transfer
must be completed by pressing the Transfer button or hanging
up. This method cannot be used by QCC operators.
A transferred call can be answered by using the Pickup
features.
A single-line telephone user with a Recall button can use it to
transfer a call.
Transfer returns ring until answered and do not receive
Abbreviated Ring. Ring Timing Options are ignored on a
Transfer Return call; the button rings immediately even if it is
programmed for No Ring.
The Saved Number Dial feature can be used to originate a
transfer to an outside telephone number.
A Signaling button can be used to dial the destination
extension after the Transfer button is pressed, but cannot be
used to initiate One-Touch Transfer.
494 Transfer