Instruction manual

Features
Touch-Tone or Rotary Signaling
At a Glance
Users Affected
Telephone users, operators
Reports Affected
DID Trunk Information
GS/LS Trunk Information
System Information
Tie Trunk Information
Mode
All
Telephones
All
System Programming Change individual trunk to rotary or touch-tone service:
● LinesTrunks → TT/LS Disc → Outmode
Change individual tie trunk to rotary or touch-tone service:
● LinesTrunks → TIE Lines → Inmode
Change individual tie trunk to rotary or touch-tone service:
● Lines Trunks → TIE Lines → Outmode
Change DID trunk block to rotary or touch-tone signaling:
● LinesTrunks → DID → Signaling
Change rotary signaling:
● Options → More → Rotary → Delay/No Delay
Factory Settings
DID
Rotary
Loop-Start/
Ground-Start
Touch-tone
Tie
Rotary
Rotary Signaling Delay
Description
Touch-tone tip/ring equipment, such as single-line telephones or fax machines,
are equipped with a dialpad that generates dual-tone multifrequency (DTMF)
signals when a dial button is pressed. Analog multiline and MLX telephones are
equipped with dialpads that generate digitally coded signals when a dial button
is pressed. The duration of the signal sent is 50 milliseconds (50 ms) and is not
adjustable.
Touch-Tone or Rotary Signaling 481