Instruction manual

Features
Feature Interactions
Automatic Route
In certain areas, the local telephone company requires dialing
Selection the prefix 1 for certain exchanges. In these cases, the
exchanges can be assigned to a 1+7 ARS table, and the 1+7
Dial setting must be set to “within area code.” This dialing
requirement is not related to Toll Type.
Disallowed Lists When trunks with different toll types are connected to the
system (for example, basic trunks and PRI facilities), a toll prefix
(0 or 1) maybe required for toll calls on some trunks but not on
other trunks. In this case, two Disallowed List entries are
required to restrict users from dialing specific area codes
and/or telephone numbers. For example, to restrict users from
dialing calls in the 505 area code on both toll types, one entry
must be 1505 and the other entry must be 505. When the
Disallowed List is assigned to an extension, the 505 entry
restricts users from making calls to the 505 area code on trunks
that do not require a toll prefix and the 1505 entry restricts
users from making calls (including local calls) to the 505 area
code on trunks that do require a toll prefix.
480 Toll Type