Instruction manual

Features
System Renumbering
At a Glance
Users Affected
Reports Affected
Mode
Telephones
System Programming
Maximums
Factory Settings
Numbering Plan
ARS/Idle Line
Access Code
Calling Groups
DSS Page 1 button
DSS Page 2 button
DSS Page 3 button
Telephone users, operators
Automatic Route Selection
Dial Plan
Extension Directory
Extension Information
Group Paging
Operator Information
Remote Access (DISA) Information
All
All
Change the 2-digit numbering plan to 3-digit or Set Up Space:
● SysRenumber → Default Numbering
→ 2–Digit/3–Digit/Set-up Space
Renumber individual stations or groups of stations, Calling
Group extensions, Group Page extension, pool
dial-out codes, system operator Park Zones, the Listed
Directory Number extension, the Remote Access code, the ARS
access code, or assign the range of extensions on a DSS:
● SysRenumber → Single
● Sys Renumber → Block
Numbering Range: 0-9950
2-digit
9 (all numbering plans)
770-791 and 7920-7929 (all numbering plans)
starts with extension 0
starts with extension 50
starts with extension 100
Continued on next page
System Renumbering 467