Instruction manual

Features
Queued Call Consoles
To make an outgoing call activate Account Code Entry by selecting the feature
from the Home screen or by pressing the Feature button and selecting Account
Code Entry from the display After the account code is dialed, the entry is
completed by dialing #. Then select a Personal Line, SA, or Pool button on
which to make the call.
Normally account codes cannot be entered when a Group Coverage call is
answered at a Group Cover button programmed on a multiline telephone.
However, when the QCC queue is programmed as the receiver for a Coverage
group, Cover buttons are not required and the QCC system operator can enter
account codes. Those account codes appear on the SMDR printout. In this
case, the Account Code Entry feature must be activated from the display and
cannot be activated by dialing the feature code.
Other Multiline Telephones
An MLX telephone user can program account codes either individually, on
outside Auto Dial buttons, or as an entry in the Personal Directory (MLX-20L™
telephones). The user can enter an account code by pressing the Feature
button and selecting Account Code from the display.
On all other multiline telephones, Account Code Entry is activated by pressing a
programmed Account Code Entry button or by pressing the Feature button
and dialing 82. After the account code is dialed, the entry is completed by
pressing a programmed Account Code Entry button or dialing #. On MLX
display telephones, the feature can also be activated and completed by
pressing the Feature button and selecting the feature from the display. Once
the entry is completed, the user can select a Personal Line, SA, or Pool
button, lift the handset, and make the call.
NOTE:
If the multiline telephone user completes the entry by dialing a #, account
codes cannot be entered with System Speed Dial or Personal Speed Dial,
since the # is used to complete the entry and cannot also be used to
activate Speed Dial.
When Account Code Entry is assigned to a button, the LED flashes when the
user lifts the handset and attempts an outside call. On MLX display telephones,
the feature name appears on the display. The user can then enter the account
code, press the Account Code Entry button (the green LED goes from flashing
to on), select the outside line, and proceed with the call.
16 Account Code Entry/Forced Account Code Entry