Instruction manual

Features
speakerphone. Both parties hear a beep and the called
person hears the caller’s voice over the speakerphone.
Since voice-announced calls cannot be made to single-line
telephones, a call made on this button to a single-line
telephone is a ringing call even if the single-line telephone
has a speakerphone.
Originate Only
Button is used only to make inside and outside calls. Calls
are not ordinarily received on this button. Its purpose is to
ensure that the user always has a button available to make
or transfer calls, establish conference calls, answer Call
Waiting calls, or pickup parked calls. The button can be
programmed for either Ring or Voice operation for inside
calls.
The default attribute for all SA buttons (including Shared SA buttons) after the
factory settings by telephone type is Ring. The factory setting for Automatic
Line Selection (ALS) is a sequence of SA buttons. Ringing for all types of SA
buttons is set by default to Immediate Ring and can be changed to Delay Ring
or No Ring. (See Ringing Options.)
Shared SA Buttons —
Hybrid/PBX Mode
Each SA button (whether Ring, Voice, or Originate Only) assigned as a factory
setting or through centralized telephone programming is identified with a
specific extension. To allow two or more telephone users to join in each others’
conversations and answer each others’ calls, Shared SA buttons can be
assigned. In a shared arrangement, the SA button identified with the extension
is the principal (or primary) button. Up to 16 other multiline telephones can
have Shared SA buttons corresponding to the principal extension. A telephone
can have up to nine Shared SA buttons for other extensions, but can have only
one Shared SA button for a given principal extension.
The green LED next to a Shared SA button behaves in the same way as on the
principal extension. When the principal extension or any Shared SA button
corresponding to it is busy on a call, the LED is on at the principal extension
and at all Shared SA buttons for that extension. When a call arrives at the
principal extension, that extension rings and the LED at its SA button flashes.
All telephones with corresponding Shared SA buttons also ring, and the LED at
the Shared SA button flashes.
The telephone user at the principal extension can use Send Ring, This feature
overrides Delay Ring programmed for any telephones with Shared SA buttons
for the principal extension. When a call arrives for the principal extension while
it is busy, the telephones with the Shared SA buttons for that extension ring
immediately.
When Do Not Disturb is turned on at the principal extension, calls do not ring at
that extension or at other telephones with Shared SA buttons for that extension.
System Access/Intercom Buttons 459