Instruction manual

Features
To redial a number using Saved Number Dial, the user selects the appropriate
line for the call and presses the programmed Saved Number Dial button. The
number saved by the feature is dialed automatically. MLX display telephones
users cannot use the feature by selecting it from the display, but can use the
display to program the feature onto a button.
Single-Line Telephones
Saved Number Dial cannot be used on a single-line telephone.
Feature Interactions
Auto Dial
Automatic Route
Selection
Directory
Direct Station
Selector
Display
Inspect
Microphone
Disable
A number dialed by pressing a programmed outside Auto Dial
button is stored for Saved Number Dial as if it were dialed with
the dialpad, but special characters do not work. An extension
dialed by pressing a programmed inside Auto Dial button is not
stored for Saved Number Dial.
The ARS dial-out code is saved with the telephone number
dialed.
Saved Number Dial does not store numbers dialed using a
Personal, Extension, or System Directory listing.
An extension number dialed by pressing a DSS button is not
stored for Saved Number Dial.
When a user presses a programmed Saved Number Dial
button, the digits appear on the display as if the user were
dialing them from the dialpad.
In Release 1.0 and 1.1, when a user presses Inspct and then a
programmed Saved Number Dial button, Saved Number
Dial appears on the display.
In Release 2.0, when a user presses Inspct and then a
programmed Saved Number Dial button, the saved number
appears on the display.
When an MLX telephone user’s microphone is disabled,
pressing a Saved Number Dial button before lifting the handset
turns on the speakerphone so the user can hear the number
being dialed. However, the user must lift the handset to talk
once the call is answered.
Saved Number Dial
439