Instruction manual

Features
Saved Number Dial
At a Glance
Description
Users Affected
Telephone users, DLC operators
Reports Affected
Extension Directory
Mode
All
Telephones
All except QCC and single-line telephones
Programming Code
*85
MLX Display Label
SaveNumDial [Save#]
Maximums
16 digits
Saved Number Dial allows a user to save the last number dialed from a multiline
telephone and call the number again without manually redialing. The user can
save the number even if the person being called answers. The number saved is
any extension or telephone number dialed using one of the following methods:
■ dialing the complete number on the dialpad
■ dialing the number using a Personal Speed Dial code
■ dialing the number using a programmed outside Auto Dial button
Saved Number Dial does not store numbers dialed with an Extension, Personal,
or System Directory, an inside Auto Dial button, a System Speed Dial code, or
a DSS (Direct Station Selector) button.
Unlike Last Number Dial, Saved Number Dial does not replace the number
saved each time the user dials a new number, unless the user presses the
programmed Saved Number Dial button before hanging up.
Considerations and Constraints
Saved Number Dial cannot be used on a Multi-Function Module (MFM).
The number of Saved Number Dial buttons that can be programmed on each
multiline telephone is limited only by the number of available programmable
buttons.
Since the type of line button (Personal Line, SA, or ICOM) used to make the
call is not stored, the user must select the appropriate line button before using
Saved Number Dial to redial a number.
Saved Number Dial
437